Press Releases

 
NEWS



Enthusiastic crowds at record-breaking 2010 World of Asphalt and AGG1 shows

The co-located 2010 World of Asphalt Show & Conference and AGG1 Aggregates Forum & Expo have just concluded a record-breaking run despite the lingering downturn, with packed exhibit aisles and education sessions.

The shows, which were held February 15-18, 2010 at the Duke Energy Center in downtown Cincinnati, Ohio, posted record numbers for registrants, amount of exhibit space taken and number of education session tickets purchased.

Final registration numbers topped a record-breaking 6,200 for the two shows compared to 5,795 for the 2009 events, and included registrants from all 50 states, all 10 Canadian provinces, and more than 30 other countries worldwide. More than 25 percent were company presidents/owners, vice presidents, general managers or chief financial officers. All together, 80 percent of registrants were in managerial roles.

The show floor covered a record 87,000-plus net square feet of exhibit space, compared to the 2009 total of 85,900 net square feet. More than 340 exhibitors showcased the latest technologies, equipment and products for aggregates, asphalt, pavement maintenance, and traffic safety professionals.

A record 6,600 education session tickets were purchased for the conferences, training programs and seminars held with the two shows, compared to the 2009 total of 5,730.

"This was truly an industry gathering place with a positive buzz throughout the convention center. Participants connected to share experiences and get up to speed on the latest technologies and 'best practices' that will drive growth in tomorrow's economy," stated Show Director Melissa Magestro.

"Our industry has been hit hard by this recession but there is some optimism looking ahead. We received very favorable feedback about the shows' value in fostering these industry connections to help participants succeed," Magestro added.

AGG1 and World of Asphalt are industry-run shows, and industry support has been key to their success, explained Magestro. "We understand that attendees and exhibitors need to carefully evaluate their budgets and time and make choices. Our industry partnerships and co-located events broaden the depth of the show experience for all participants and provide maximum return on investment," she stated.Co-locating with AGG1 and World of Asphalt in 2010 were the Flexible Pavements of Ohio annual meeting and the Plantmix Asphalt Industry of
Kentucky (PAIKY) Winter Training School.

Several educational gatherings were also held in conjunction with the shows. These included the AGG1 Academy, the People, Plants and Paving Program, and the Asphalt Pavement Alliance's Asphalt Pavement Conference.

Attendees also had access to the co-located National Traffic Management and Work Zone Safety Power Workshop, sponsored by the American Road and Transportation Builders Association (ARTBA); a NIOSH Seminar on Major Hazard Risk Assessment; a Project Management Essentials workshop; and an OSHA 10-hour course for construction workers certification program.

The shows are not held during CONEXPO-CON/AGG show years so in 2011, World of Asphalt and AGG1 exhibitors and products will be spotlighted at CONEXPO-CON/AGG, in March 2011 in Las Vegas. The co-located shows return in 2012 - March 12-15 in Charlotte, North Carolina.

AGG1 is owned by the National Stone, Sand and Gravel Association (NSSGA); World of Asphalt is owned by the National Asphalt Pavement Association
(NAPA) and Association of Equipment Manufacturers (AEM). AEM is show producer.
 
Eaton Puts Range of Sustainable Products in Action on New Web Site

CLEVELAND … Energy efficient products for use at home, at work, on the road and more are showcased in Eaton Sustainable Community, the new Web feature from diversified industrial manufacturer Eaton Corporation.

“Eaton Sustainable Community is a natural resource for telling our sustainability story,” said Jeff Krakowiak, senior vice president Sales and Marketing. “It gathers together the wide range of Eaton products and solutions that help our customers manage their power needs and serves as a ‘one-stop shop’ to learn more.”

Visitors to Eaton Sustainable Community (www.eaton.com) can click through the company’s most sustainable products in familiar applications. From office and plant facilities, to solar farms, cityscapes, airports and hydropower dams, each of the 12 scenes present multiple Eaton sustainable products that help customers use power more efficiently and safely.

Dozens of products are featured, including electrical solutions such as Eaton’s industry-leading 9395 Uninterruptible Power System (UPS) and power-saving meters for buildings of all types; hydraulic solutions like hydropower controls for dams and efficient fuel pumps for aircraft; mechanical applications including hybrid power systems for commercial vehicles and superchargers for passenger cars.

Eaton Corporation is a diversified power management company with 2008 sales of $15.4 billion. Eaton is a global technology leader in electrical components and systems for power quality, distribution and control; hydraulics components, systems and services for industrial and mobile equipment; aerospace fuel, hydraulics and pneumatic systems for commercial and military use; and truck and automotive drivetrain and powertrain systems for performance, fuel economy and safety. Eaton has approximately 70,000 employees and sells products to customers in more than 150 countries. For more information, visit www.eaton.com.
Northman Fluid Power Announces the Re-Design of Their Web Site: www.northmanfp.com

Carol Stream, IL. Northman Fluid Power completely re-designed their web site in structure and content. Information is now organized for ease-of-use in locating and using product data and technical assistance. Product series and model codes now present all available product offerings and support data. Structural changes in the web site enable updates to be timely enacted to keep the site current.

“Our goals in the redesign were to create a web site where the user can immediately find the desired information,” said Jim Cubberly, Product Manager, “and to consolidate the support materials for our current product offerings. We also want to present the message that we carry a large inventory and ship at least 98% of all daily orders the same day.”

Northman Co., Ltd, founded in 1971, has grown into a global manufacturer of hydraulic directional control valves, control valves and vane pumps. Northman Fluid Power is located in Carol Stream, IL, a suburb of Chicago, serving North American customers in the USA, Canada and Mexico.

For more information, contact:
Northman Fluid Power
739 Kimberly Drive
Carol Stream, IL 60188
630-588-8488
inquiry@northmanfp.com
Eatonite Laser Coating for Piston Rods is the First Anti-Corrosion Technology To Earn JIP Certification from DNV for use on Offshore Platforms

EDEN PRAIRIE, Minn. … Diversified industrial manufacturer Eaton Corporation today announced that its proprietary Eatonite™ Laser Clad coating technology was certified by independent test services company DNV after fulfilling requirements stated in the “Guideline for qualification of wear and corrosion protection surface materials for piston rods” developed as part of a Joint Industry Project (JIP).

“Eaton is the first, and to date the only, cylinder manufacturing company that has passed the JIP test requirements,” said Dr. Luis F. Garfias, director of Testing & Qualification for DNV’s Materials & Corrosion Technology Center in Columbus, Ohio.

“DNV-certified Eatonite laser coating technology is a significant breakthrough for upstream, offshore applications in the oil and gas industry,” said Astrid Mozes, vice president and general manager of Eaton’s Controls Division. “It will also provide new solutions in key industries like Hydropower and virtually anywhere else piston rods are exposed to severe environmental corrosion.”

Piston rod samples made of SAE 4130 steel coated with Eatonite were tested at DNV laboratories in Høvik, Norway, and Columbus, Ohio, for a wide range of physical, mechanical, and electrochemical properties to evaluate the performance of the Eatonite coating against the JIP standard.

“Controlling corrosion is an ongoing challenge for the offshore oil industry,” said Dr. Alexander Bogicevic, senior technology manager of Eaton’s Innovation Center in Southfield, Mich. “We developed the Eatonite laser coating technology to extend the life of piston rods used in hydraulic riser tensioning systems on offshore platforms. Many materials and processes were tested and the result of this multi-year development program was the Eatonite technology.

“After proprietary processing, the Eatonite material is twice as hard as conventional Inconel 625, a well known corrosion resistant alloy (CRA), but also has good cladding homogeneity due to the novel laser technology developed to deposit the Eatonite. As confirmed by the DNV certification testing, Eatonite-clad rods deliver the mechanical performance of traditional SAE 4130 steel piston rods, along with the corrosion resistance expected for CRA materials like Inconel 625. It really does give customers the best of both worlds”

Eatonite testing is the subject of a technical paper being prepared for the 2010 Offshore Technology Conference (OTC).

DNV is a global provider of services for managing risk, helping customers to safely and responsibly improve their business performance. DNV is an independent foundation with presence in more than 100 countries. The DNV Columbus office (formerly CC Technologies) provides expertise in materials testing, corrosion, fitness for service, structural and pipeline integrity, as well as materials, certification and new technology qualification for industry. For more information on DNV's services, visit www.dnvcolumbus.com.

Eaton’s Hydraulics Group is a segment of the company’s Industrial Sector. The business is a worldwide leader in the design, manufacture and marketing of a comprehensive line of reliable, high-efficiency hydraulic systems and components for use in mobile and industrial applications. Mobile and industrial markets include agriculture, construction, mining, forestry, utility, material handling, earthmoving, truck and bus, machine tools, molding, primary metals, automotive, power generation, port machinery and entertainment. Eaton’s Hydraulics Group provides customer-driven solutions under product names such as Aeroquip®, Boston®, Char-Lynn®, Eaton®, Hydro-Line®, Synflex®, Vickers®, Walterscheid™, and Weatherhead®. For more information, visit www.eaton.com/hydraulics.

SAUER-DANFOSS INC. AND TOPCON POSITIONING SYSTEMS, INC. ENTER INTO NEW PHASE OF RELATIONSHIP

MINNEAPOLIS, Minnesota, USA, August 10, 2009 - TSD Integrated Controls, a joint venture of Sauer-Danfoss Inc. (NYSE:SHS) and Topcon Positioning Systems, Inc., has operated successfully in the Road Building and Agricultural markets since 2001, enjoying unprecedented market growth and product leadership.Market dynamics in Road Building and Agriculture continue to evolve and as a result, it has been decided jointly by the parent companies to transition the relationship from a joint venture operation to one of Strategic Partnering. The companies believe that this is the best way to serve the future interests of the TSD customer
base.

“We have had a very successful joint venture partnership, developing industry-leading solutions like 3DmmGPS-based controls for the asphalt and concrete paving markets, and the TruPath™ automated guidance system for the Ag market,” commented Bill Welscher, TSD general manager. “This updated arrangement will continue the positive cooperation, but will also allow the parent companies to more fully focus on their individual strengths within their respective technologies.”

Beginning on September 1, 2009, all TSD original equipment manufacturer (OEM) customers in the Road Building market will be transferred to Sauer-Danfoss for their commercial relationship and sales support. Topcon will continue to exclusively supply Sauer-Danfoss with various products for this market segment. For the Ag market, the TruPath autosteer product and other Ag specific products will be supplied directly by Topcon to the current TSD OEM customers.
The Oilgear Company, a global leader in the design and manufacture of fluid power components and systems, recently launched its new corporate Web site : www.oilgear.com

The new, user-friendly site provides customers with useful information on Oilgear’s:
• broad range of fluid power products
• commitment to aftermarket services
• integrated engineered systems solutions and custom-engineered products
• world-wide reach within the global fluid power industry

Detailed technical information on Oilgear’s fluid power products is featured on the site, including a helpful How to Order form for all pumps. All of the latest Oilgear product sales bulletins and service manuals are also ready for download in the new Technical Library.

Oilgear’s extensive Service & Support programs are highlighted on the site, as well as interesting articles featuring the successful implementation of several Engineered Solutions systems for a variety of industrial, civil and military applications.

Future plans for the site include the development of country-specific sites that will be adapted to address the fluid power needs of Oilgear's world-wide customers.

Since 1921, The Oilgear Company has been a leader in the global fluid power industry providing advanced technology in the design and production of unique fluid power components and electric controls. The company serves customers in the primary metals, machine tool, automobile, petroleum, construction equipment, chemical, plastic, glass, lumber, rubber and food industries.

For more information, please contact:
The Oilgear Company
Milwaukee, WI 53234
Phone: (414) 327-1700
Eaton’s Hydraulics Group Offers New, Four And One-Half Day
“Wind Turbine Fundamental Hydraulics” Training Course

EDEN PRAIRIE, Minn. … Diversified industrial manufacturer Eaton Corporation today announced the creation of a new, four and a half-day training course entitled “Wind Turbine Fundamental Hydraulics” intended for sales and maintenance personnel requiring a solid understanding of hydraulics systems used in wind turbine operation.

“Nearly half of the utility grade wind turbines currently in service depend on hydraulic pitch and yaw controls. Many of the others use electric pitch and yaw controls but may incorporate the use of hydraulics for braking or utilize a forced lubrication system,” explained Tom Blansett, manager-training services of Eaton’s Hydraulics Group. “The new course will provide a solid foundation in hydraulic fundamentals and operating principles with special emphasis on wind turbine operations, including pitch and yaw control, braking, and cooling and filtration systems.”

The “Wind Turbine Fundamental Hydraulics” course will focus on component construction and operation with a goal of understanding the interaction of individual components in an integrated wind turbine hydraulic system. Topics covered in the course will include:


• Hydraulic Principles and Fundamentals
• Graphic Symbology
• Hydraulic Fluids and Reservoirs
• Gear, Vane, and Piston Pumps
• Pressure Controls
• Directional Controls
• Flow Controls
• Cylinders
• Hydraulic Motors
• Contamination Control
• Electro-hydraulic Valves
• Screw-In Cartridge Valves
• Accumulators


Scheduling, tuition, and registration information is available from:
Eaton’s Hydraulics Group,
Training Services,
1785 Indian Wood Circle,
Maumee, OH 43537
800-413-8809
www.eaton.com/hydraulics/training
hydraulicstraining@eaton.com
Quaker Chemical Launches New and Improved quintolubric.com Website

CONSHOHOCKEN, Pa., June 2 /PRNewswire/ -- Conshohocken-based Quaker Chemical Corporation, a leading global provider of process chemicals, today announced the launch of the new QUINTOLUBRIC® website, www.quintolubric.com, to better meet the needs of their customers. The new site has been redesigned with a clearer structure and simplified, user-friendly navigation that makes finding information easier than before. The site also has a totally new graphic look.

The new site has Quaker’s Fluid Power products listed by hydraulic fluid category (HFA, HFC, and HFD) and also by industry, making it easy for visitors to find the exact hydraulic fluid they need. Users can access expanded content and enhanced access to technical information, such as data sheets and case studies, to receive technical assistance at the click of a button. Also, visitors can download marketing materials (folders and handouts) right from the site, adding to its convenience. The site also provides a link for visitors to request MSDSs and additional hydraulic fluid information, and a listing to find the QUINTOLUBRIC® Value Added Representative nearest to them.

Quaker has long been known for delivering innovative solutions to industry problems, and their fire-resistant fluids product line offers innovative technologies to the aluminum, steel/primary metal, automotive, mining, tunneling, marine/offshore, bearing, heavy duty equipment, tube and pipe and power generation industries. Quaker’s QUINTOLUBRIC® line of fire-resistant fluids is known the world over for delivering high-quality, high-performance and environmental compatibility.

Visit the new www.quintolubric.com to see all it has to offer in fire-resistant fluids.

Quaker Chemical Corporation is a leading global provider of process chemicals, chemical specialties, services, and technical expertise to a wide range of industries -- including steel, automotive, mining, aerospace, tube and pipe, coatings, and construction materials. Our products, technical solutions, and chemical management services enhance our customers' processes, improve their product quality, and lower their costs. Quaker's headquarters is located near Philadelphia in Conshohocken, Pennsylvania.
Reynolds Promoted to Vice President of Operations

Robertsdale, AL: CRC Manufacturing, Inc. President and CEO Stephen Walker announces the promotion of Monty Reynolds to vice president of operations for the manufacturing company, headquartered in Robertsdale. In his new role, Reynolds will manage and direct the organization towards its long-term product and profitability goals.
Formerly production manager of the facility, which manufactures and repairs custom heavy-duty hydraulic cylinders for the global market, Reynolds has worked for CRC since 2007, and has 15 years experience in the manufacturing environment. Additionally, he formerly served as general manager for John Deere's first manufacturing facility in Russia and in various roles for other manufacturing companies in the Mobile area.

CRC Manufacturing, Inc., is a premier manufacturer of custom hydraulic cylinders for a number of industries and applications, including offshore and land-based energy, marine, mining, scrap & waste, testing & analysis and military. In addition to its manufacturing headquarters in Robertsdale, the company also operates facilities in Madera, CA, and Laurel, MS.CRC Manufacturing designs, engineers, and produces specialized hydraulic cylinders for a wide variety of applications in industries around the world, including onshore and offshore energy, maritime and mining. For additional information, please visit www.crcmfg.com.
Eaton Manufacturing Plant Awarded “Efficiency Partner 2009”
Recognition by Xcel Energy Corporation

EDEN PRAIRIE, Minn. … Diversified industrial manufacturer Eaton Corporation today announced it has received Xcel Energy’s Efficiency Partner 2009 Recognition for its Eden Prairie hydraulic pump, motor and steering unit manufacturing facility.

“We’re very pleased to earn this recognition,” said Lawrence P. Harer, maintenance and tool room manager for the 40-year-old, 233,000 square foot plant. “What’s especially beneficial is that we didn’t just reduce our carbon footprint, we also improved the efficiency of our operations.”

Harer said that the Eden Prairie plant focused on opportunities related to its air management system. The plant requires a significant amount of compressed air for a variety of operations such as air-drying of painted parts, powering hand tools and removal of metal chips from machined parts.

“We replaced one of three compressors, invested in quieter, more low pressure types of air nozzles, eliminated some high volume compressed air blow offs with high efficiency blowers and installed an automated system to completely manage the plant’s air handling, he said. “Along with a series of other incremental changes, the improved air management system was the key to our success.”

Xcel Energy spokesman Ryan Schunk said the Efficiency Partners Recognition program recognizes a small group of businesses and trade partners for their outstanding efforts in 2008. "Energy-efficiency efforts, such as those at Eaton's Eden Prairie plant, are typically 'invisible' projects to those not directly involved with the project,” he said. “This program is a way to publicly congratulate those efforts in a fashion that employees and customers can recognize."

Xcel Energy is headquartered in Minneapolis and serves residential and industrial customers in the Midwest and Southwest.

Eaton’s Hydraulics Group is a segment of the company’s Industrial Sector. The business is a worldwide leader in the design, manufacture and marketing of a comprehensive line of reliable, high-efficiency hydraulic systems and components for use in mobile and industrial applications. Mobile and industrial markets include agriculture, construction, mining, forestry, utility, material handling, earthmoving, truck and bus, machine tools, molding, primary metals, automotive, power generation, port machinery and entertainment. Eaton’s Hydraulics Group provides customer-driven solutions under product names such as Aeroquip®, Boston®, Char-Lynn®, Eaton®, Hydro-Line®, Synflex®, Vickers®, Walterscheid™, and Weatherhead®. For more information, visit www.eaton.com/hydraulics.com.
CIM-TEK FILTRATION LAUNCHES NEW WEBSITE!

Central Illinois Manufacturing Company has launched a new state-of-the-art website to help customers find information regarding their filtration needs more easily and supply more resources to aid in their efforts for purchasing, marketing, engineering and sales. Some of the exciting new features of Cim-Tek’s website are the online petroleum and hydraulic catalogs. Users can access information faster by using the search features that will automatically turn pages to find a specific part number or model. Also, Cim-Tek’s website will remember a visitor’s computer storing any digital information they write on the catalog sticky notes instantly for reference the next time the visitor opens the catalog. Cim-Tek’s website offers downloadable cim-tek graphics, filter technical data sheets, logos, literature and informative YouTube videos on various situations regarding filtration. Visit www.cim-tek.com today to see for yourself!

For literature and technical information, call 888.898.7187.
www.cim-tek.com
ICUEE 2009 registration opens April 13

Attendee and exhibitor interest positive; Show offers new industry co-locations, expanded education

Advance registration for ICUEE – The Demo Expo is open as of April 13, 2009. Attendees can register online for the exhibition as well as show education and housing, and they can save time and money by registering in advance. Full details are online at www.icuee.com.
Despite a stalled economy, industry interest in the show remains positive. In a recent survey of past attendees:
• 94 percent said their companies were sending the same number or more people to the 2009 ICUEE compared to the last show.
• More than 48 percent said they planned to increase or keep the same level of equipment purchases as previous years.

ICUEE is the International Construction and Utility Equipment Exposition, and the biennial event will be held October 6-8, 2009 at the Kentucky Exposition Center in Louisville, Kentucky.

“Without a doubt, these are difficult times for companies, but they know they need to keep up to speed to be ready for the recovery. And, AEM trade shows such as ICUEE are a proven way for industry professionals to connect with each other and learn from each other,” stated Show Director Melissa Magestro. “At ICUEE, they’ll not only find the newest innovations, they can ‘test drive’ them right on the show site.”

Magestro said that ICUEE has a track record of giving attendees access to the leaders in the utility and construction industry, and of bringing a highly qualified audience to the show for exhibitors. She cited some numbers from the last show:
• 97 percent said ICUEE was valuable to their business.
• 78 percent of attendees said they had a company role in purchasing equipment.
• 77 percent said they would not have made the same purchase decision if they did not attend ICUEE.

Exhibit space sales are trending ahead of the last show with more than 1 million net square feet taken. Magestro noted that 95 percent of exhibitors from the last show said they met their goal of introducing new products and services to customers, and she expects this to be no different for ICUEE 2009 exhibitors.
ICUEE’s value has increased with new co-located events for 2009 and a 100 percent increase in education offered, including sessions on sustainability and renewable energy. “Attendees will be ahead of their competition, with new ideas, sharpened skills and solid business connections,” Magestro stated.

New to ICUEE for 2009 are the inaugural H2O-XPO show (water and wastewater), the IUV Technical Conference and exhibit pavilion (design and engineering), and the iP Safety Conference and Safety Zone exhibit pavilion (safety and training). For more information, email info@icuee.com or go online at www.icuee.com.
Eaton Speeds Warranty Evaluation And Repair, Names First 10 Certified Warranty Centers For Eaton, Vickers and Char-Lynn Products


EDEN PRAIRIE, Minn. … Diversified industrial manufacturer Eaton Corporation today announced it has certified the first 10 warranty centers under the Eaton Warranty Center Program. This program is designed to improve customer satisfaction by speeding warranty evaluation and repairs.

“Customers will be able to send qualifying Eaton®, Vickers®, and Char-Lynn® products to a Certified Warranty Center for warranty evaluation and repair rather than shipping it to the location that produced it,” said G. Paul Hagel, warranty center manager for Eaton’s Hydraulics Group. “Our goal is to streamline the warranty evaluation and repair process to minimize downtime and cost for our customers.

“Since announcing the program in 2008, distributors have expressed a lot of interest in the program and, as a result, Eaton is in process of certifying additional Warranty Center locations.”

In order to qualify as a Certified Warranty Center, the distributor must:

• Have adequate facilities including an area of at least 1,000 square feet dedicated to warranty evaluation and repairs;
• Participate in a regularly scheduled calibration program for tools, transducers, gauges and other devices used to evaluate products;
• Have test stands capable of 75 – 200 hp at 5,000 psi; and
• Employ qualified technicians that have successfully completed Eaton’s Failure Analysis Course.

The first 10 Certified Warranty Centers are located in Minnesota, Florida, Alabama and Candad. The program’s goal is to have 50 to 60 Certified Warranty Centers operating in all 50 states and Canada.

Eaton Premier Advantage. Premier Select hydraulic distributors and existing Eaton Quality Assurance Warranty Centers are eligible to participate in the Warranty Center Program after meeting strict certification standards.

In addition, Eaton named Dover Hydraulics of Dover, Ohio, as the exclusive Certified Warranty Center for Eaton’s Hydrokraft™ products. This will further enhance our customer experience by virtually eliminating the need for customers to return Hydrokraft product to the Wehrheim plant in Germany for warranty evaluation and repair. DTS Fluid Power of Grandville, Mich., will continue to be the exclusive Certified Warranty Center for Eaton’s ME Series Hydraulic Motors, which in most cases, eliminates the need for return of product to Eaton’s Japanese operations for evaluation and repair.

Eaton’s Hydraulics Group is a segment of the company’s Industrial Sector. The business is a worldwide leader in the design, manufacture and marketing of a comprehensive line of reliable, high-efficiency hydraulic systems and components for use in mobile and industrial applications. Mobile and industrial markets include agriculture, construction, mining, forestry, utility, material handling, earthmoving, truck and bus, machine tools, molding, primary metals, automotive, power generation, port machinery and entertainment. Eaton’s Hydraulics Group provides customer-driven solutions under product names such as Aeroquip®, Boston®, Char-Lynn®, Eaton®, Hydro-Line®, Synflex®, Vickers®, Walterscheid™, and Weatherhead®. For more information, visit www.eaton.com/hydraulics.

Eaton Corporation is a diversified power management company with 2008 sales of $15.4 billion. Eaton is a global technology leader in electrical components and systems for power quality, distribution and control; hydraulics components, systems and services for industrial and mobile equipment; aerospace fuel, hydraulics and pneumatic systems for commercial and military use; and truck and automotive drivetrain and powertrain systems for performance, fuel economy and safety. Eaton has approximately 75,000 employees and sells products to customers in more than 150 countries. For more information, visit www.eaton.com.
Northern Iron And Machine Installs New DISA 130 Automated Molding Line
– Capabilities Of 130 Molds Per Hour

St. Paul, Minnesota: Northern Iron and Machine announced installation of a new DISA Match 130 automated molding line. The new system doubles the company’s molding capacity and is now fully operational.

The new system replaces three outdated molding lines, allowing for greater efficiency and cost competitiveness while increasing productivity.

The DISA line can produce up to 130 high quality molds per hour with a flask size of 20 x 24 inches. The system utilizes existing match plate patterns so there is typically no conversion costs or steps from the old system to the new. The fully automated line is ideal for low to medium run requirements.

The DISA 130 is a proven system where shorter runs require frequent pattern changes. It has a robust design that ensures higher mold density and better accuracy with more production flexibility for lower operating costs.

Northern Iron And Machine is a ductile and gray iron contract manufacturer that also provides finish-machined parts, painting and assembly of castings in its machine shop. It currently ships more than 4,500 tons of castings a year to the construction, off-highway, agricultural and railroad industries.

Originating in 1906, Northern Iron and Machine has been a dedicated foundry and precision machined parts supplier to key midwestern industries. It is an ISO 9001:2000 five furnace foundry capable of producing castings up to 250 lbs. in all grades of ductile, austempered ductile and gray iron.

For more information, call 651-778-3320. See at www.northernim.com
Write to Northern Iron and Machine, 867 Forest Street, St. Paul, Minnesota 55106. Fax: 651-778-1321.
Sauer-Danfoss Introduces New Web Site


The New Sauer-Danfoss Web Site Puts Comprehensive Product and System Information at Your Fingertips.

NORDBORG, DENMARK – SAUER-DANFOSS INC. (NYSE:SHS) Sauer-Danfoss
has launched a new company web site designed to provide comprehensive product, system,and company information. The result of an extensive development process, the new web site
features intuitive navigation, easily accessible literature, and full text search functionality that
enables visitors to find exactly what they are looking for – quickly and easily. As the demand
for on-line information continues to grow, the new Sauer-Danfoss web site will help support
effective market communication, share application knowledge, and strengthen customer
relationships.

“Our new web site better represents our brand, values, product portfolio, and systems
competencies and will make it even easier to do business with Sauer-Danfoss,” said Lars
Bech, Global Web Manager. “Through a development process that included customer
interviews and user testing we have endeavored to make a web site that is both useful and
usable.”

Extensive Application Knowledge
Tomorrow’s vehicles will require a higher level of vehicle management and electronics,
improved productivity and ease of operation. With this in mind, the updated Applications
area offers a range of information and system examples for off-highway vehicles. From
market trends and application expertise, to suggestions for work, propel, steering, and
control systems, this section provides ideas and inspiration for vehicle development.

Comprehensive Product Information
Fast access to product information and technical documentation is essential for design
engineers. The Products area provides detailed information for all of the products in the
Sauer-Danfoss portfolio. With features and benefits, technical data and documentation, and
links to related information, the new web site guides design engineers to the right products
for their applications.

Detailed Company Information
The new web site also contains a wealth of additional company information. The About Us
and Job & Careers sections highlight the people, culture and values that make Sauer-Danfoss
a market leader. The detailed Contact Us section enables visitors to find their nearest Sauer2
Danfoss contact, no matter where in the world they are located. To find out more, explore
the Sauer-Danfoss web site at www.sauer-danfoss.com.
New Electronic Measurement Solutions Catalog from NOSHOK

No matter what the application, chances are you’ll find a pressure or temperature sensing solution in NOSHOK’s new ELECTRONIC MEASUREMENT SOLUTIONS Catalog, featuring our complete offering of industry-leading pressure, level and temperature measuring electronic instrumentation. Click on the link below to view a printable PDF.

This catalog contains detailed product information and user-friendly specifications on our comprehensive range of Transducers and Transmitters for a variety of requirements.

Our full range of Digital Indicators is also showcased, along with our new Digital Pressure Gauges, both Electronic and Mechanical Pressure Switches and our new Indicating Pressure & Temperature Switch/Transmitters.

All of our indicators can be pre-programmed and calibrated to customer specifications. Our goal is to make installation easy and performance dependable.
This catalog, and all of our other catalogs, flyers and technical manuals can be viewed and downloaded from our website at www.noshok.com in the Reference Materials Section. Or, order your printed copy (Catalog #NK08ES-1) by contacting NOSHOK’s Customer Service Team at:
NOSHOK, Inc., 1010 West Bagley Rd.,
Berea, Oh 44017,
Phone 440-243-0888,
Fax 440-243-3472.
Northman Fluid Power Products Now Stocked in Canada -Oct. 27, 2008


Northman Fluid Power, Carol Stream, IL is pleased to announce its new association with ITM in Canada.

ITM now fills a vital role in the supply channel of product to Northman’s Canadian distributors. The stocking program in place at ITM’s Mississaugua, Ontario facility means that Northman’s hydraulic valves and pumps will be readily available to Canadian users.

ITM has been serving its customers in Ontario and across Canada for fifteen years with a range of hydraulic services. The warehouse addition of the Northman line broadens ITM’s efforts in fluid power, and strengthens the presence of Northman in Canada.

For more information, contact Northman Fluid Power in the USA at 630-588-8488, or ITM in Canada at 905-612-0400.

 
AEM names new directors

Bobcat/Doosan and LBX Company executives serve on board of
equipment manufacturers’ trade group

The Association of Equipment Manufacturers (AEM) has named two off-road equipment
manufacturing industry executives to the AEM Board of Directors. They are:

• Robert G. Harvell, President and CEO of LBX Company LLC in Lexington,
Kentucky, and
• Scott R. Nelson, President of Bobcat Company Worldwide and CEO of Doosan
Infracore International in West Fargo, North Dakota.

AEM directors help set the guidelines and operating policies of the association on behalf
of its members in areas including technical and product safety support, equipment
statistics and market information, public policy representation, trade shows, global
business development services, education and training, workforce development and
worksite safety/ educational materials.

AEM is the North American-based international trade group representing the off-road
equipment manufacturing industry, and its members manufacture equipment, products
and services used worldwide in the agriculture, construction, forestry, mining and utility
sectors. AEM is headquartered in Milwaukee, Wisconsin and has offices in the world
capitals of Washington, D.C.; Ottawa, Canada; and Beijing, China; with a European
presence in Brussels, Belgium.

 
Eaton Expands European Hydraulics Business

CLEVELAND … Diversified industrial manufacturer Eaton Corporation (NYSE:ETN) today announced it has acquired Integ Holdings Limited, the parent company of Integrated Hydraulics Ltd., a U.K. manufacturer of screw-in cartridge valves, custom-engineered hydraulic valves and manifold systems. Terms of the deal were not disclosed.

“This acquisition expands the geographic presence of Eaton’s hydraulics business, enhances its current hydraulic product portfolio and helps us become a more significant partner for European customers,” said William R. VanArsdale, president – Eaton’s Hydraulics Business.

The company employs approximately 290 people.

Eaton Corporation is a diversified power management company with 2007 sales of $13 billion. Eaton is a global technology leader in electrical systems for power quality, distribution and control; hydraulics components, systems and services for industrial and mobile equipment; aerospace fuel, hydraulics and pneumatic systems for commercial and military use; and truck and automotive drivetrain and powertrain systems for performance, fuel economy and safety. Eaton has 81,000 employees and sells products to customers in more than 150 countries.

 
Eaton’s Hydraulics Operations Supports Sustainability With Plastic Hose Reel Recycling Program For Distributors
EDEN PRAIRIE, Minn. … Diversified industrial manufacturer Eaton Corporation announced today it has enhanced its return and recycling program for plastic reels used to ship various hose products from Eaton’s Hydraulics Operations plants to Eaton distributors in the United States and Canada. As part of a company-wide effort to support environmental sustainability, Eaton distributors can return empty hose reels to a central location where they will be evaluated for re-use or recycling, depending on their condition. Reusable reel assemblies are then returned to Eaton facilities in the United States and Canada.
“Plastic hose reels are both safer and lighter than the wooden reels they replace,” said Jason Bricker, manager, materials planning for Eaton’s Hydraulics Operations. “Many localities will not accept wooden reels for recycling. In addition, they splinter easily and the metal banding used to secure the hose on them can present a safety hazard if handled improperly.
“The plastic reels eliminate all of those issues, and reduce shipping costs while opening the door for enhanced re-use and recycling opportunities that aren’t feasible with the wooden reels. The net result is a ‘greener,’ more sustainable operation with less environmental impact at every step of the process.”
Eaton’s Hydraulics Operations has contracted with Roadway Reverse Logistics of Grove City, Ohio, to pick up pallets of used hose reels from Eaton distributors and take them to their facility for reassembly, cleaning, and inspection prior to re-use or re-cycling. Distributors are requested to disassemble and palletize 22 or 28 inch reels prior to calling for a pick up, and encouraged to re-use original packaging to further reduce environmental impact.
Distributors can obtain a detailed program instruction sheet from Eaton’s Hydraulics Operations’ Customer Connect secure eBusiness website. There is no cost to distributors for this service.
Eaton’s Hydraulics Operation is a business segment of the Eaton Fluid Power Group. The business is a worldwide leader in the design, manufacture and marketing of a comprehensive line of reliable, high-efficiency hydraulic systems and components for use in mobile and industrial applications. Mobile and industrial markets include agriculture, construction, mining, forestry, utility, material handling, earthmoving, truck and bus, machine tools, molding, primary metals, automotive, power generation, port machinery and entertainment. Eaton’s Hydraulics Operation provides customer-driven solutions under brand names such as Aeroquip®, Boston®, Char-Lynn®, Eaton®, Hydro-Line®, Synflex®, Vickers®, Walterscheid™, and Weatherhead®. For more information, visit www.hydraulics.eaton.com.

Eaton Corporation is a diversified power management company with 2007 sales of $13 billion. Eaton is a global technology leader in electrical systems for power quality, distribution and control; hydraulics components, systems and services for industrial and mobile equipment; aerospace fuel, hydraulics and pneumatic systems for commercial and military use; and truck and automotive drivetrain and powertrain systems for performance, fuel economy and safety. Eaton has 81,000 employees and sells products to customers in more than 150 countries. For more information, visit www.eaton.com.
Simrit Expands Oil and Gas Industry Capabilities Through Acquisition

PLYMOUTH, Mich., June 17, 2008 – Simrit, a division of Freudenberg-NOK, announced the acquisition of the assets of the Tetralene companies of Houston, Texas, a developer and manufacturer of specialized custom sealing components for the oil and gas industry. Terms of the agreement were not disclosed.

Tetralene manufactures custom high-performance thermoplastic and elastomeric components that range in diameter from 1/64" through 72". Their products include custom spring energized seals as well as complete seal stack solutions for the most demanding applications and environments. Tetralene is a full-service supplier, providing mold design and material testing while producing a wide range of machined thermoplastic and custom molded elastomeric seals, packing and components for high temperature and/or high pressure environments. They also bring a new and unique process for fabricating PEEK components to the Freudenberg-NOK manufacturing portfolio.

Tetralene’s Robert Costolnick will become the new Lead Center Manager and will facilitate the move into a larger, Houston-based facility that will position the organization for future growth. “We have always felt that our employees make the difference,” Robert said. “Our talented associates and proven processes, matched with the resources and stability of a global company like Freudenberg-NOK, provide a distinct advantage to our customers.”

Those customers will be serviced through the Simrit sales division of Freudenberg-NOK. “The products produced by Tetralene are a perfect complement to Simrit’s existing activities in the energy sector,” stated Dave Monaco, president of Simrit. “We currently produce oil and gas components in the U.S., Canada, Norway and Scotland and this acquisition exemplifies our commitment to grow in the global oil and gas market.”

The Simrit Division is based at Freudenberg-NOK’s headquarters in Plymouth, Mich. Freudenberg-NOK is part of the Freudenberg and NOK Group Companies, which have total annual sales of more than $12 billion. Simrit offers an extensive portfolio of precision-manufactured products for the semiconductor, aerospace, appliance, diesel engine, marine, off-highway equipment, oil and gas, and recreational vehicle markets.

For more information, visit the Simrit website at www.simrit.com.


 
Simrit Facility Wins Schlumberger Award for Service and Product Quality
Inaugural honor awarded to Simrit’s Nisku, Alberta, Canada facility for exceptional service

PLYMOUTH, Mich., May 15, 2008 – In recognition of its outstanding performance in service and product quality, Simrit’s Nisku, Alberta, Canada facility recently received the first performance award ever given by the Edmonton Product Center of Schlumberger Limited. Part of the Simrit Division of Freudenberg-NOK, the Nisku facility was unanimously selected as the only recipient for this award.

“It’s a great honor to be recognized by Schlumberger, a leading oilfield services provider, for our dedication to providing superior service and products,” said Carla Bugler, product manager, Simrit. “At the Nisku facility, we strive to offer exceptional customer service, as well as quality products that impeccably fit our customers’ needs.”

According to Bugler, in recent years, the oil and gas industry has evolved from the “faster is better” mindset to placing a greater emphasis on service and product quality. Simrit has been on the forefront of driving and maintaining outstanding quality controls processes and engineering standards for sealing products that surpass customer expectations.

Simrit’s Nisku facility, which manufactures elastomer products for the oil and gas industry, has supplied bonded seals and elements to Schlumberger for 23 years. These products are used by Schlumberger in down hole completion tools in the production of oil and gas. With 65 employees located in the heart of the oil and gas industry, Simrit’s Nisku facility also designs and manufactures safety products (blow out preventers), cement products (cement plugs) and well service products (swab cups).

Certified to the ISO 9001:2000 standards, Simrit’s Nisku facility ensures product quality and customer satisfaction are top priorities and is dedicated to finding and addressing any issues prior to delivery. Extensive raw material testing (to ASTM standards) is performed on all rubber products and Certificates of Analysis are available upon request with results from rubber testing. Additionally, Simrit engineers conduct rigorous final inspections, which include a test for physical defects and a dimension check to drawings.

The Simrit Division is based at Freudenberg-NOK’s headquarters in Plymouth, Mich. and is part of the Freudenberg and NOK Group, which has total annual sales of more than $12 billion. Simrit offers an extensive portfolio of sealing solutions for the aerospace, appliance, diesel engine, industrial, marine, off-highway equipment, oil and gas, recreational vehicle and semiconductor markets.

For more information, visit the Simrit website at www.simrit.com.


$499,974 State Grant Supports Application Of Eaton’s Hydraulic Launch Assist
Technology To Cut Greenhouse Gas Emissions From Texas Shuttle Bus Fleet

EDEN PRAIRIE, Minn. … Diversified industrial manufacturer Eaton Corporation’s fuel-saving Hydraulic Launch Assist ™ (HLA) technology will be used on a south Texas fleet of urban shuttle busses to reduce greenhouse gas emissions.

The shuttle bus emissions initiative was made possible by a $499,974 New Technology Research and Development (NTRD) Grant awarded by the Houston Advanced Research Center (HARC). The grant, announced by HARC Program Director Rudy Smaling, builds on a highly successful 2006 project in which Eaton’s HLA systems were installed on 12 refuse trucks under a State of Texas New Technology Research and Development Grant.

“This is an important technology,” Smaling said. “It cuts exhaust emissions and fuel costs, making it possible for both operators and the environment to come out ahead. The refuse trucks delivered fuel savings of 25 to 28 percent, and we fully expect similar savings from the shuttle bus application. Eaton is a leader in developing and applying hybrid technologies that cut greenhouse gas emissions, as well as those of nitrous oxide.”

“We collaborated with HARC on the refuse truck project and look forward to building on that experience in rolling out HLA technology into the shuttle bus market,” said Bradley Bohlmann, business development manager for Eaton Fluid Power Group’s Advanced Technology Team. “HARC is a very forward-looking organization, and we could not ask for a better collaborator for the expansion of the HLA system and follow-on emission-reducing technologies.”

Eaton’s HLA system is a regenerative braking system that captures and stores the vehicle’s kinetic energy rather than dissipating it as heat. Braking energy is stored in pressurized accumulators and then used to help accelerate the vehicle. The HLA system is an ideal hybrid technology for vehicles with duty cycles including many starts and stops because it efficiently captures and re-cycles energy using relatively simple, highly-durable components that are easily integrated into conventional drivetrains.

Eaton’s Hydraulics Operation is a business segment of the Eaton Fluid Power Group. The business is a worldwide leader in the design, manufacture and marketing of a comprehensive line of reliable, high-efficiency hydraulic systems and components for use in mobile and industrial applications. Mobile and industrial markets include agriculture, construction, mining, forestry, utility, material handling, earthmoving, truck and bus, machine tools, molding, primary metals, automotive, power generation, port machinery and entertainment. Eaton’s Hydraulics Operation provides customer-driven solutions under brand names such as Aeroquip®, Boston®, Char-Lynn®, Eaton®, Hydro-Line®, Synflex®, Vickers®, Walterscheid™, and Weatherhead®. For more information, visit www.hydraulics.eaton.com.
Parker Hannifin Corporation, the world leader in motion and control technologies, announces the release of the Critical Hydraulic and Pneumatic Maintenance & Repair Components Catalog (PH001/NA), or, more simply, “The Parker Book." Now available through Parker authorized full line distributors, the new catalog provides the maintenance, repair and overhaul (MRO) market with the most complete range of hydraulic and pneumatic components available from any single source.

“Parker authorized full line distributors already provide local engineering, system support and inventories to serve MRO customers," said Mark Kugelman, Vice President, Business Development. “The Parker Book is another powerful tool that exposes these customers to the full range of products our distributors can offer them."

With 800 pages and over 8,000 parts, “The Parker Book" features major sections on valves, hoses, fittings, filters, cylinders and much more. Three indexes assist the user in locating parts: the product category listing (by category grouping); the alpha numeric index (by part number); and the product index (by product name). Durable tabs and a heavy stock cover ensure that The Parker Book will survive the most demanding MRO environments.

To get a copy of “The Parker Book", call toll free at 1-800-C-Parker. The catalog is also available from your local, full line authorized Parker distributors.


 
SSP Pump by Alfa Laval Pump Ltd. Now offers a unique handbook called Problem Solving – Positive Displacement Pumps. This helpful document addresses many of the commonly overlooked and misunderstood operating issues that adversely affect a positive displacement pump’s service life. Topics such as poor piping practices, seal failure, wet-end wear, cavitation, shaft breakage, and many others topics are thoroughly explained and well illustrated for easy reference. If you have experienced less than optimal service life on your pump you will find the handbook invaluable.

 
Gates announces management changes effective September 1, 2007

Gates Corporation Announces Executive Management Changes

Denver, CO – Gates Corporation Chairman Richard Bell has announced a series of executive management changes to be implemented effective September 1, 2007. The changes follow his recent appointment to Chief Operating Officer of the Industrial and Automotive Division of Tomkins plc.


John Bohenick has been named President of Gates Corporation. Bohenick has served as both President of Gates Power Transmission Division North American and most recently as President of Gates European Power Transmission Division where he led the company’s power transmission operations for all customers in all European markets. As President of Gates Corporation, Bohenick is now responsible for all operations of the Company. Gates Corporation is the largest non-tire rubber manufacturer in North America and one of the world’s leading manufacturers of automotive and industrial products, systems and components with operations in 21 countries.
Bohenick began his career with Gates in 1988, after working several years at General Motors Pontiac Motor Division and at Saturn Corporation.
A graduate of Cornell University, Bohenick earned a Bachelor of Science with Distinction in Mechanical Engineering.

Marco Moran has been named President of the Gates Worldwide Fluid Power Division where he assumes responsibility for leading the company’s Fluid Power operations worldwide for all customers in all markets. Moran served previously as President of the Company’s Worldwide Power Transmission Division.
Moran began his career with Gates in 1975 with Gates Mexico where he was responsible for all operations including manufacturing, engineering, quality, purchasing, human resources, logistics and distribution. In 2000, he assumed responsibility for operations in North America and Brazil, including nine Gates manufacturing facilities. Moran served as President of the PT Division in Europe from 2003 until 2006 when he returned to Denver. Moran studied industrial engineering and business management and has been a professor in the areas of manufacturing and strategic management. He is a Founder of the Industrial Council of the State of Mexico as well as Industrial Association of the Toluca Valley. He served as a Board Member for the Industry Rubber Chamber.

Lou Braga has been named President of Gates Unitta Asia (GUA) and will relocate to the company’s headquarters in Osaka, Japan. Braga served previously as President of Gates Worldwide Fluid Power Division where he led the company’s Fluid Power operations worldwide for all customers in all markets.
Braga has had various management positions within Gates parent company, Tomkins plc. He served as Group President of Tomkins Fluid Systems from 2000 to 2004; Executive Vice President and General Manager of Stant Manufacturing, Inc. from 1996 – 2000, and as Vice President and General Manager of Standard Thompson Corporation from 1994 – 1996. Prior to that, he held marketing, engineering and technical positions at Allied Signal, Inc. Braga is a member of the Board of Directors for the National Fluid Power Association (NFPA). He is also a member of the Society of Automotive Engineers (SAE).


 
EATON Hydraulics Names Russoniello Power Products General Manager
EDEN PRAIRIE, MINN … Ruppert Russoniello has been named general manager of the Power Products Division, Hydraulics Operations, effective August 1. Russoniello will report to William VanArsdale, vice president and president - Hydraulics Operations. He will be located in Eden Prairie, Minn, and succeeds Scott Deakin, who left the company.

“Ruppert has a strong track record of financial and operational results as well as new product introductions,” said VanArsdale. “We look forward to his leadership in driving strategic and growth objectives throughout the Power Division.”

Since joining Eaton in 1994, Russoniello has held roles of increasing responsibility in sales, product management and marketing in the Electrical Group. Most recently, he was the business unit manager of the Electrical Group’s Industrial Controls Division. Prior to joining Eaton, he was an engineer and product manager with Westinghouse’s Distribution and Control Business Unit. Russoniello holds a bachelor’s degree in electrical engineering from the Stevens Institute of Technology in Hoboken, NJ.

Eaton’s Hydraulics Operations is a business segment of Eaton’s Fluid Power Group.
The business is a worldwide leader in the design, manufacture and marketing of a comprehensive line of reliable, high-efficiency hydraulic systems and components for use in mobile and industrial applications. Mobile and industrial markets include agriculture, construction, mining, forestry, utility, material handling, earthmoving, truck and bus, machine tools, molding, primary metals, automotive, power generation, port machinery and entertainment. Eaton’s Hydraulics Operations provides customer-driven solutions under brand names such as Aeroquip®, Boston®, Char-Lynn®, Eaton®, Hydro-Line®, Vickers™ and Weatherhead®. For more information, visit www.hydraulics.eaton.com.


 
Eaton Introduces A-Frame Global Gear Pumps
EDEN PRAIRIE, Minn. … Diversified industrial manufacturer Eaton Corporation has expanded its gear pump portfolio with the addition of A-frame Global Gear Pumps (GGPs).

The new pumps satisfy global demand for gear pumps that are smaller, quieter, competitively priced, and, most importantly, operate at 280 bar continuous pressure. Eaton A-frame GGPs are offered in two families:

AEG Aluminum Series—Floating bushing, pressure-balanced design with a high-strength extruded aluminum body and cast iron end cap and mounting flange
AEK Cast Iron Series—Fixed bushings, pressure-balanced design with a high-strength cast iron construction throughout
The Aluminum pumps are now available and all cast iron versions will be offered soon.

New Eaton GGPs offer numerous sought-after features, such as high-efficiency gear profiles; 12-tooth, low-noise and low-pressure ripple gear design; and SAE, DIN and ISO flanges, shafts and ports. Versions with European standard rectangular mounting flanges will also be available.

The pumps are suitable for numerous applications including turf care, agricultural tractors and harvesters, lift trucks, skidsteer loaders, salt and sand spreaders, general industrial applications and power packs.

The A-Frame Aluminum Pump GGP is the first size to be released. Other sizes, additional features, and motors will follow in the months to come. Technical information for Eaton Global Gear Pumps is included in bulletin E-PUGE-MR002-E on the Eaton website
at: www.eaton.com.

Eaton’s Hydraulics Operations is a business segment of the Eaton Fluid Power Group. The business is a worldwide leader in the design, manufacture and marketing of a comprehensive line of reliable, high-efficiency hydraulic systems and components for use in mobile and industrial applications. Mobile and industrial markets include agriculture, construction, mining, forestry, utility, material handling, earthmoving, truck and bus, machine tools, molding, primary metals, automotive, power generation, port machinery and entertainment. Eaton’s Hydraulics Operations provides customer-driven solutions under brand names such as Aeroquip®, Boston®, Char-Lynn®, Eaton®, Hydro-Line®, Vickers® and Weatherhead®. For more information, visit www.hydraulics.eaton.com.


 
Deublin launches new Engineering Catalog for Machine Tool applications
 Deublin Company has just released a new 36-page Engineering Catalog MT072-US for designers and users of Rotating Unions for machine tool, machining center and transfer line applications. This comprehensive guide offers easy-to-use reference chart and ordering checklist.

The catalog also features expanded product options with specifications of over 170 models including bearing supported, bearingless, multi-passage, closed-seal, pop-off, auto-sense and controlled leakage designs.

For designers of machine tools, the catalog offers operating principles, selection criteria and design principles for maximum service life and ease of use. For users of machine tools, such reference information as installation techniques, coolant filtration and thread specifications are detailed.